Drawer Kit Pack for 30cm Wide Carcass / Drawer Height 93mm - Depth 400mm
Product features
- Hardware kit necessary for mounting a drawer of 93mm height and depth of 400 mm, except for the drawer front, including bottom and back in 16 mm board.
- Synchronized total extraction runners, with soft closing and load capacity of 40 kg.
- Adjustment of the front: ±2mm in vertical and ±1mm in horizontal.
- Made of anthracite gray painted steel and chipboard with light grey melamine.
Kit for kitchen and bathroom drawer with all the necessary elements for its assembly. It is the optimal solution for your kitchen, bathroom or wardrobe furniture with an elegant design in anthracite gray and light grey finish. Each kit is made up of all the elements necessary for mounting an external drawer of 93 mm height and depth 400 mm with various module widths. Includes: two sides, one set of soft-close runners, one set of covers, bottom and back boards and drawer front hooks. You will simply need the front panel with the necessary dimensions of the drawer.
The metal sides are made of steel with anthracite gray painted and, allow the drawer front to be adjusted ± 2mm vertically and ± 1mm horizontally /strong>. The guides are total extraction with soft closing and allow a maximum load of 40 Kg for the drawer.
The boards included for the bottom and the back are made of chipboard in ligth gray finish, with a rough surface to give greater surface resistance. The boards are 16 mm thick and are cut to size from standard units (from 300mm, to 1200 mm). However, can be cut to fit the width of the module needed.
